westybay
Hi, I don't know if anyone can help I have quite a few quite a few 2 aspect signals that I need to wire, I am using CR signals and ip analog point motors, my frogs are taken care of by the motors but is there any way I can control any of the signals using the motors to change the signals or can someone on suggest an easy way to wire the signals.
Quote 0 0
newbryford
The Analog motor has a second switch - S3
Connect a power supply positive to the common terminal. Connect L and R to your red and green signals and then back from the signals with a resistor to the power supply negative. 

Cheers,
Mick
Quote 1 0
westybay
Thanks Mick I guessed there must be a way to use that third switch but the brain wasn't working, that is how I wanted it to work. Thanks again

Regards
Jon (WestyBay79)
Quote 0 0