John Ramsay
can someone help me I am struggling to work out the wiring configuration for a two point crossover using peco electrofrog points. I know I can use the reverse connector but what I am struggling with is where to place the feed from the track for each point. 

Quote 0 0
Bunkerbarge
John, Both the crossover and the loop wiring diagrams are on the Cobalt SS instruction manual here:

https://www.dccconcepts.com/manual/cobalt-ss/

To feed the point cut the two links below the track and solder feed wires below the track, as per the Peco diagram in their instruction.

I show how I did it on my own layout thread here:

https://www.dccconceptsforum.com/post/lincolnshire-loop-9859042?pid=1305607490&random=3793

That particular example is a single Cobalt IP digital but it is the same feed process for a crossover, just remember whatever convention you are using.  In my own case I use red feeds to the inner rail and black feeds to the outer rail.
Quote 0 0