JMan

Can DCD-ABC slow or stop modules be wired into either Cobalt iP Digital and/or ADS-2/4/8sx units to prevent trains running over points the wrong way?

Regards,
JMan

Quote 0 0
AHJAY
Yes, there are terminals to link to a switch on the ABC boards

regards, Ahjay
Quote 0 0
m.bryan
The ABC boards can be switched in/out of circuit with any convenient switch - be it a manual toggle, or an auxiliary switch on a Cobalt motor.

If you are using an ADS unit and electrofrog points, you would ideally need to use the frog switch terminals to switch a relay.
The relay contacts can then be used to switch the frog and also switch the ABC module.

A suitable relay would be our DCD-REX.
Mick
DCCConcepts Tech/Customer support
Quote 0 0
JMan
Thank you Ahjay & Mick
Quote 0 0